LR3/Disco 3
Install the spacers equally as shown.
Lightly press the window glass to seat the sealer.
9 .
Test the sealer for leaks, apply additional sealer if necessary. If water is used, allow sealer to dry
before testing. Spray water around the glass and check for leaks. Mark any area that leaks. Dry the
glass and sealer then apply additional sealer.
10 .
Connect the rear quarter window glass antenna connector.
Clean the component mating faces.
11 .
Install the rear quarter window glass panel.
Secure with the clips.
12 .
Install the D-pillar upper trim panel. For additional information, refer to
D-Pillar Trim Panel
(76.13.30)
(Section 501-05)
