LR3/Disco 3
Hood Latch Release Handle (76.16.30)
Removal
Installation
Published : Apr 28, 2004
1 .
Remove the cowl side trim panel. For additional information, refer to
Cowl Side Trim Panel
(76.13.27)
(Section 501-05)
2 .
Disconnect the hood release cable from the connecting box.
Open the connecting box cover.
3 .
Remove the hood release lever housing.
Remove the bolt.
Disconnect the hood release cable.
1 .
Install the hood release lever housing.
Connect the hood release cable.
Tighten the bolt to 5 Nm (3.7 lb.ft).
2 .
Attach the hood release cable to the connecting box.
Close the connecting box cover.
3 .
Install the cowl side trim panel. For additional information, refer to
Cowl Side Trim Panel (76.13.27)
(Section 501-05)