LR3/Disco 3
The gas guide pipe and air curtain are secured along the cant rail by a fixing at the front of the gas guide pipe, two fixings
at the B pillar ramp, two clips and two screws, and two fixings at the end of the gas guide pipe and C pillar ramp.
At the rear of the air curtain, an active tether device is clipped in two positions down the C pillar. At the bottom of the
active tether device is a fixing anchorage.
The front of the air curtain is secured to the A pillar by two fixings.
When the side air curtain deploys, it breaks out of the B pillar ramp and the clips on the cant rail and extends downwards
from behind the headliner. The deploying air curtain is tensioned between the anchorage points on the A pillar and the
active tether device on the C pillar. This retains the air curtain in position against the upper part of the doors and the B
pillar.
Third Row Side Air Curtain
NOTE :
The third row side air curtains are installed on the cant rails above the rear quarter windows, behind the headliner.
Right side air curtain shown, left side air curtain is mirror image
Item Part Number
Description
1
-
Securing screw
2
-
Air curtain
3
-
Securing screw
4
-
Rear tether
5
-
Gas guide pipe
6
-
Inflator mounting bracket
7
-
Inflator
8
-
Rear tether anchor
9
-
Tether housing
10
-
Rear tether
11
-
Front tether anchor
