LR3/Disco 3
Passenger Air Bag Deactivation (PAD) Switch (76.74.19)
Removal
Installation
Published : Jun 16, 2004
1 .
Make the SRS system safe. For additional information, refer to
Standard Workshop Practices
(Section 100-00)
2 .
Remove the passenger side register trim panel. For additional information, refer to
Passenger Side
Register Trim Panel (76.46.13)
(Section 412-01)
3 .
Remove the PAD switch.
Disconnect the electrical connector.
Release the 2 clips.
1 .
Install the PAD switch.
Connect the electrical connector.
Secure with the clips.
2 .
Install the passenger side register trim panel. For additional information, refer to
Passenger Side
Register Trim Panel (76.46.13)
(Section 412-01)
