LR3/Disco 3
Installation
1 .
Install the horn assemblies.
Install the air deflectors.
Install the bolts and tighten to 10 Nm (7 lb.ft).
2 .
Install the LH hood latch.
Tighten the Torx bolts to 10 Nm (7 lb.ft).
3 .
Install the RH hood latch.
Attach the hood release cable.
Install the hood switch.
Tighten the Torx bolts to 10 Nm (7 lb.ft).
4 .
Install the spacers.
Install the clips.
5 .
NOTE :
Align to the position noted on removal.
With assistance, install the hood latch panel.
6 .
Install the panel fixings.
Install and tighten the bolts to 25 Nm (18 lb.ft).
7 .
NOTE :
Align to the position noted on removal.
Install the wiring harness.
Connect and secure the electrical connector.
Carefully secure the clips.
8 .