Range Rover P38
MANIFOLD AND EXHAUST SYSTEM
17
REPAIR
10. Disconnect multiplug from compressor.
11. Remove 4 bolts securing compressor to
mounting bracket and position compressor
aside.
12. Remove 2 bolts securing PAS pump to mounting
bracket and position aside.
13. Remove bolt securing jockey pulley to mounting
bracket and remove pulley.
14. Remove 4 bolts and one nut securing mounting
bracket and remove mounting bracket .
15. Remove 4 bolts securing top hose outlet pipe
and remove outlet pipe.
16. Remove and discard ’O’ ring.
17. Disconnect ECT sensor multiplug.
