GASKET - INLET MANIFOLD - LOWER- FROM 99MY
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › GASKET - INLET MANIFOLD - LOWER- FROM 99MY
30
MANIFOLD AND EXHAUST SYSTEM
NEW RANGE ROVER
16
REPAIR
GASKET - INLET MANIFOLD - LOWER- FROM
99MY
Service repair no - 30.15.08
Remove
1. Remove RH and LH rocker cover gaskets.
See
ENGINE, Repair.
2. Disconnect multiplugs from coils.
3. Remove 2 bolts securing coils and remove coils.
4. Release leads from fuel rails and disconnect LH
and RH injector multiplugs.
5. Position absorbent cloth to catch any fuel
spillage and disconnect fuel pipe.
CAUTION: Plug the connections.
6. Remove auxiliary drive belt.
See ELECTRICAL,
Repair.
7. Remove 2 nuts securing leads to alternator and
release leads.
8. Release clip securing top hose to outlet pipe and
release hose.
9. Remove 2 bolts securing alternator and remove
alternator.
Parts & tools for this job For Land Rover Range Rover
- PARTExhaust gasketSearch: Land Rover Range Rover exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.