Range Rover P38
PROPELLER SHAFTS
1
REPAIR
PROPELLER SHAFT - FRONT
Service repair no - 47.15.02
Remove
1. Raise vehicle on four post lift.
2. Mark propeller shaft and drive flanges for
reassembly.
3. With assistance, remove 4 nuts and bolts
securing each propeller shaft flange.
NOTE: Raise 1 front road wheel and rotate
propeller shaft as necessary to gain
access to all fixings.
CAUTION: Assistance is necessary to
support propeller shaft when fixings are
removed.
4. Remove propeller shaft.
Refit
5. Clean mating faces of flanges.
6. Position propeller shaft. Align flange markings.
7. Fit bolts and new Nyloc nuts. Tighten to
48 Nm
(35 lbf.ft)
NOTE: Fit bolts with heads toward transfer
box and away from differential.
8. Lower vehicle.