Range Rover P38
47
PROPELLER SHAFTS
NEW RANGE ROVER
2
REPAIR
PROPELLER SHAFT - REAR
Service repair no - 47.15.03
Remove
1. Raise vehicle on four post lift.
NOTE: Raise road wheel to allow rotation
of propeller shaft.
2. Mark propeller shaft and drive flanges to aid
re-assembly.
3. Remove 4 bolts securing propeller shaft guard to
floor pan. Remove guard.
4. Remove 4 nuts securing propeller shaft to brake
drum.
5. With assistance, remove 4 nuts and bolts
securing propeller shaft to differential drive
flange. Remove shaft.
Refit
6. Ensure mating faces are clean.
7. Position shaft to differential drive flange. Align
marks.
8. Secure with bolts new Nyloc nuts. Tighten to
48 Nm. (35 lbf.ft)
NOTE: Bolts fitted with heads away from
differential.
9. Position shaft to brake drum. Align marks.
Secure with nuts. Tighten to
48 Nm. (35 lbf.ft)
10. Position propeller shaft guard. Secure with bolts.
11. Lower lift.
