Range Rover P38
INSTRUMENTS
1
REPAIR
INSTRUMENT BINNACLE
Service repair no - 88.20.02
Remove
1. Remove covers from screws securing fascia
closing panel.
2. Remove 4 screws, release fascia closing panel.
3. Disconnect drivers lap vent duct. Remove fascia
closing panel.
4. Remove 4 screws securing instrument binnacle
to fascia.
5. Release binnacle from fascia. Disconnect fuel
filler flap release switch multiplug.
6. Remove binnacle.
Refit
7. Position binnacle.
8. Connect multiplug to fuel filler flap release
switch. Align to fascia.
9. Fit screws securing instrument binnacle to
fascia.
10. Position fascia closing panel. Connect drivers
lap vent.
11. Align closing panel. Secure with screws.
12. Fit screw covers.