Range Rover P38
FRONT AXLE AND FINAL DRIVE
1
REPAIR
DIFFERENTIAL ASSEMBLY
Service repair no - 54.10.01
Remove
1. Remove track rod.
See STEERING, Repair.
2. Drain axle oil.
3. Remove hub assemblies.
See FRONT
SUSPENSION, Repair.
4. Mark differential and propeller shaft flanges to
aid reassembly.
5. Remove 4 nuts and bolts securing propeller
shaft to differential; discard nuts. Release shaft,
tie aside.
6. Remove 10 nuts securing differential to axle
case. Remove differential.
Refit
7. Ensure mating faces are clean.
8. Apply a bead of RTV sealant to axle case.
9. Position differential. Secure with nuts. Tighten to
40 Nm (30 lbf.ft)
10. Position propeller shaft. Align marks on flanges.
11. Secure shaft with bolts and new nuts. Tighten to
48 Nm (35 lbf.ft)
12. Refit hub assemblies.
See FRONT
SUSPENSION, Repair.
13. Refit track rod.
See STEERING, Repair.
14. Replenish axle oil.
See LUBRICANTS, FLUIDS
AND CAPACITIES, Information.