Range Rover P38
30
MANIFOLD AND EXHAUST SYSTEM
NEW RANGE ROVER
4
REPAIR
EXHAUST MANIFOLD GASKETS - V8 - FROM
99MY
Service repair no - 30.15.16 - Right Hand
Service repair no - 30.15.17 - Left Hand
1. Release 3 fixings and remove battery cover.
2. Disconnect battery negative lead.
3. Raise vehicle on four post lift.
4. Remove 3 nuts securing each front pipe flange
to exhaust manifold.
5. Release front pipe from exhaust manifold.
Collect gaskets.
6. Lower lift.
7. Disconnect multiplug from MAF sensor and
release harness from clip on air intake hose.
8. Release clip and disconnect hose from IAC
valve.
9. Loosen clip and disconnect air intake hose from
throttle body.
10. Release two clips securing MAF sensor to air
cleaner.
11. Remove MAF sensor and hose assembly.
Collect ’O’ ring.
12. Release spark plug caps. Release H.T. leads
from clips on rocker cover. Place leads aside.