Range Rover P38
MANIFOLD AND EXHAUST SYSTEM
29
REPAIR
TAIL PIPE - RH - FROM 97MY
Service repair no - 30.10.52
Remove
1. Raise vehicle on 4 post ramp.
2. Loosen clamp securing LH tail pipe to RH tail
pipe.
3. Remove 2 nuts securing tail pipe flange to
intermediate pipe flange.
4. Release RH tail pipe from 2 mounting rubbers.
5. With assistance, release RH tail pipe from LH tail
pipe and remove tail pipe.
Refit
6. Clean tail pipe mating faces.
7. With assistance, position RH tail pipe to vehicle
and fit to mounting rubbers.
8. Engage RH tail pipe to LH tail pipe.
9. Align tail pipe flange to intermediate pipe flange
and fit nuts. Tighten nuts to
25 Nm (18 lbf.ft)
10. Tighten nut securing RH tail pipe to LH tail pipe
to
65 Nm (48 lbf.ft) .