Range Rover P38
30
MANIFOLD AND EXHAUST SYSTEM
NEW RANGE ROVER
28
REPAIR
TAIL PIPE - LH - FROM 97MY
Service repair no - 30.10.22
Remove
1. Raise vehicle on 4 post ramp.
2. Loosen clamp securing LH tail pipe to RH tail
pipe.
3. Release LH tail pipe from 2 mounting rubbers.
4. Release LH tail pipe from RH tail pipe and
remove tail pipe.
Refit
5. Clean tail pipe mating faces.
6. Position LH tail pipe to vehicle and fit to
mounting rubbers.
7. Engage LH tail pipe to RH tail pipe and tighten
clamp to
65 Nm (48 lbf.ft)