Range Rover P38
ZF AUTO
13
REPAIR
12. Remove 4 bolts securing rear propeller shaft
guard. Remove guard.
13. Mark transfer box and propeller shaft flanges to
aid re-assembly.
14. Raise one wheel on each axle to allow rotation
of propeller shafts.
15. Remove 4 bolts from each flange. Disconnect
propeller shafts. Tie aside.
16. Lower gearbox for access.
CAUTION: Place wooden block between
axle case and sump to support engine.
17. Disconnect gear selector cable trunnion from
gearbox lever. Remove 2 bolts securing selector
cable abutment bracket to gearbox. Place
selector cable aside.
18. Disconnect 2 Lucars from transfer box fluid
temperature sensor.