Range Rover P38
44
AUTOMATIC GEARBOX
NEW RANGE ROVER
14
REPAIR
19. Disconnect multiplugs from High/Low motor and
output shaft speed sensor.
20. Disconnect multiplugs from gear selection
position switch and gearbox speed sensor.
21. Release harness from clips.
22. Remove bolt from clamp securing gearbox
cooler pipes to engine.
23. Disconnect transmission cooler pipes. Remove
’O’ rings and discard. Plug pipes and
connections.
24. Release fluid filler pipe from gearbox. Remove
’O’ ring and discard. Plug pipe and connection.
25. Disconnect breather pipes from gearbox and
transfer box. Plug Pipes and connections.
26. Remove 3 bolts securing converter housing
lower access cover. Remove cover. Collect
gasket.
27. Remove 9 bolts securing converter drive plate
access cover. Remove cover.
28. Mark drive plate and converter to aid
re-assembly.
29. Remove 4 bolts securing drive plate to
converter.
