AUTOMATIC GEARBOX - UP TO 99MY
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › AUTOMATIC GEARBOX - UP TO 99MY
44
AUTOMATIC GEARBOX
NEW RANGE ROVER
12
REPAIR
AUTOMATIC GEARBOX - UP TO 99MY
Service repair no - 44.20.02/99
Remove
1. Position vehicle on four post lift.
2. Disconnect battery negative lead.
3. Petrol Vehicles: Release clips securing cooling
fan cowling. Remove cowling.
4. Remove bolt securing gearbox filler tube to
engine.
5. Remove window switch pack.
See
ELECTRICAL, Repair.
6. Release handbrake. Remove handbrake cable
clevis pin.
7. Release hand brake cable from grommet in
tunnel.
8. Raise lift. Drain gearbox and transfer box fluids.
See SECTION 10, Maintenance.
9. Remove exhaust front pipe.
See MANIFOLD
AND EXHAUST SYSTEM, Repair.
Diesel Vehicles:Remove chassis cross
member. See CHASSIS AND BODY, Repair.
10. Remove 4 bolts securing transmission mounting
assembly. Remove assembly.
11. Position transmission lift adaptor LRT-99-007.
Secure to transmission mounting bracket
location with bolts. Remove transmission jack
from under brake drum.
Parts & tools for this job For Land Rover Range Rover
- PARTTransmission filter kitSearch: Land Rover Range Rover transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Land Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.