Range Rover P38
44
AUTOMATIC GEARBOX
NEW RANGE ROVER
10
REPAIR
FLUID COOLER - V8 - FROM 99MY
Service repair no - 44.24.10
Remove
1. Remove engine oil cooler.
See ENGINE,
Repair.
2. Position absorbent cloth under each gearbox
cooler pipe connection to collect spillage.
3. Loosen unions and release pipes from cooler,
discard ’O’ rings.
CAUTION: Plug the connections.
4. Remove 2 screws securing fluid temperature
sensor to cooler.
5. Remove 4 bolts securing fluid cooler to radiator
mounting brackets and remove cooler.
Refit
6. Clean fluid cooler and pipe connections.
7. Fit new fluid cooler to radiator, engage in
locations, fit and tighten bolts.
8. Position fluid temperature sensor and secure
with screws.
9. Using new ’O’ rings connect pipes to cooler and
tighten unions to
22 Nm (16 lbf.ft).
10. Top up gearbox fluid.
11. Fit engine oil cooler.
See ENGINE, Repair.