Range Rover P38
44
AUTOMATIC GEARBOX
NEW RANGE ROVER
6
REPAIR
Refit
7. Ensure ’P’ is selected by rotating selector shaft
fully clockwise.
8. Engage ’N’ by rotating selector shaft
anti-clockwise by 2 detents.
9. Connect breather hose to switch. Connect
multiplug to vehicle harness. Secure to bracket.
10. Engage switch on selector shaft. Fit nut to stud,
fit bolt. Do not tighten.
11. Fit setting tool LRT-44-011 to shaft.
12. Insert setting pin into tool. Rotate switch until
setting pin engages with hole in switch as
shown.
13. Tighten nut and bolt. Remove setting tool.
14. Fit selector lever to shaft. Secure with nut.
15. Lower vehicle.
SEAL - SELECTOR SHAFT
Service repair no - 44.15.34
Remove
1. Position vehicle on a four post lift.
2. Release fixings from battery cover and remove
cover.
3. Disconnect battery earth lead.
4. Petrol models: Release clips securing cooling
fan cowl and remove cowl.
5. Petrol models: Remove 3 bolts securing engine
RH lifting eye to cylinder head and position earth
strap and lifting eye aside.
6. Remove window switch pack.
See
ELECTRICAL, Repair.