Range Rover P38
44
AUTOMATIC GEARBOX
NEW RANGE ROVER
34
REPAIR
PRESSURE REGULATOR
Service repair no - 44.40.22
Remove
1. Remove valve body assembly.
See this
section.
2. Release and remove clip securing pressure
regulator solenoid valve harness to valve body.
3. Disconnect multiplug from pressure regulator
solenoid valve.
4. Remove 5 Torx screws securing pressure
regulator to valve body and remove pressure
regulator.
Refit
5. Clean pressure regulator and mating face with a
lint free cloth.
6. Position pressure regulator to valve body, fit
Torx screws and tighten to
8 Nm (6lbf. ft).
7. Connect multiplug to pressure regulator solenoid
valve, fit clip and secure harness to valve body.