Range Rover P38 Automatic Gearbox Repair - Fluid Pan and Filter
44
AUTOMATIC GEARBOX
NEW RANGE ROVER
30
REPAIR
Refit
7. Clean park lock components.
8. Lubricate and fit new ’O’ ring to output shaft.
9. Fit park lock gear to output shaft.
10. Diesel and 4.6 models: Fit bearing track and a
new circlip.
11. Position pivot pin, spring and ratchet.
12. Position parking pawl guide and guide plate,
tighten Torx screw to
10 Nm (7 lbf.ft).
13. Clean extension housing and gearbox case.
14. Position new gasket to gearbox case.
15. Position extension housing and tighten bolts to
25 Nm (18 lbf.ft).
16. Fit rear extension housing gasket.
See this
section.
FLUID PAN AND FILTER
Service repair no - 44.24.04 - Fluid Pan
Service repair no - 44.24.05 - Gasket
Service repair no - 44.24.07 - Fluid Filter
Remove
1. Raise vehicle on four post lift.
2. Drain transmission fluid.
3. Up to 99MY: Release fluid filler tube from pan.
From 99MY: Loosen forward bolt securing
snubber bar to cross member.
