Range Rover P38
44
AUTOMATIC GEARBOX
NEW RANGE ROVER
26
REPAIR
INTERMEDIATE PLATE
Service repair no - 44.17.20
Remove
1. Remove intermediate plate gasket.
See this
section.
2. Remove selective thrust washer from
intermediate plate.
3. Remove 2 M14 Allen plugs from intermediate
plate, remove and discard sealing washers.
4. Remove 2 M20 plugs from intermediate plate,
remove and discard sealing washers.
5. Remove 2 oil cooler pipe adaptors from
intermediate plate.
6. Remove 8 bolts securing fluid pump to
intermediate plate and carefully remove pump
from intermediate plate.
7. Note position and remove pump locating dowel.
8. Remove and discard ’O’ ring from pump
housing.
9. Remove 6 bolts securing converter housing to
intermediate plate, and release intermediate
plate from converter housing.