Range Rover (LM) V8-4.4L (2009)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Seal
Service Repair No - 12.21.14
Special Service Tools
Removal
1. Disconnect the battery ground cable.
2. Remove the crankshaft pulley.
CAUTION: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug
any open connections to prevent contamination.
3. Using the special tool, remove the crankshaft front seal.
Installation
1. Using the special tools, install the crankshaft front seal.
^
Clean the component mating faces.