Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2485002.png)
10. Remove the climate controlled seat switch.
11. Remove the floor console.
12. Remove the driver side footwell duct.
^
Remove the 2 screws.
13. Disconnect the rear blower motor electrical connector.
^
Release the rear blower motor electrical connector from the clip.
14. Release the instrument panel reinforcement.
^
Remove the 10 screws.
CAUTION: Note of the routing of the wiring harnesses.
15. With assistance, remove the instrument panel reinforcement.
^
Disconnect the sunload sensor electrical connector.
^
Release the ICP wiring harness clip.
^
Release the instrument cluster wiring harness clip.
NOTE: Do not disassemble further if the component is removed for access only.
16. Remove the sunload sensor.
^
Release the 2 clips.
17. Remove the instrument panel center reinforcement.
^
Remove the 6 screws.
