Range Rover (LM) V8-4.4L (2009)
Installation
1. Install the power steering pump.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
2. Connect the power steering pump high-pressure line.
^
Clean the component mating faces.
^
Install new sealing washers.
^
Tighten the union to 25 Nm (18 ft. lbs.).
3. Connect the power steering pump supply hose.
^
Clean the component mating faces.
^
Secure with the clip.
^
Remove the container.
4. Secure the accessory drive belt.
^
Rotate the tensioner assembly counter-clockwise.
5. Install the radiator splash shield.
6. Install the engine undershield.
7. Connect the battery ground cable.
8. Fill and bleed the power steering system.