Range Rover (LM) V8-4.4L (2009)
3. Secure the wheel knuckle to the LH rear lower arm.
^
Tighten the nut to 80 Nm (59 ft. lbs.).
WARNING: Make sure that a new bolt is installed.
CAUTION: Only tighten the nuts and bolts when the suspension is in the normal drive position.
4. Install the LH front lower arm.
^
Tighten the nut and bolt to 165 Nm (121 ft. lbs.). plus a further 90 degrees.
5. Secure the wheel knuckle to the LH front lower arm.
^
Tighten the nut to 80 Nm (59 ft. lbs.).
6. Repeat the procedure for the RH side.
7. Install the front wheels and tires.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).