Range Rover (LM) V8-4.4L (2009)
8. Mark the fitted position of the stud to aid assembly.
^
Remove the nut.
CAUTION: Lower the air suspension spring sufficiently to release the air line connection.
CAUTION: Do not allow the brake caliper to hang on the brake hose.
NOTE:
Models with standard brakes shown, models with high performance brakes similar.
9. Release the air suspension spring.
^
Remove the cap.
^
Remove the 2 remaining nuts.
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean and dry.
Plug open connections to prevent contamination.
10. Remove the air suspension spring.
^
Disconnect the air line.
^
Remove and discard the gasket.
Installation
CAUTION: Make sure the tag on the gasket is visible.
CAUTION: The final tightening of the shock absorber and spring assembly retaining nuts must be carried out with the vehicle on its
wheels.
NOTE:
If installing a new air suspension spring, remove the air line union.
NOTE:
Align stud to mark made on removal.