Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1943005.png)
CAUTION: Before disconnecting or removing the components, make sure the area around the joint faces and connections are clean. Plug open
connections to prevent contamination.
19. RH side rear: Disconnect the brake line.
^
Position an absorbent cloth to collect fluid spillage.
^
Disconnect the line union.
^
Remove the clip.
NOTE: Note the routing of the parking brake emergency release cable.
20. Displace the parking brake actuator and cable assembly.
^
Disconnect the electrical connector.
^
Remove the 2 nuts.
NOTE: Brake cable shown removed for clarity.
21. Remove the parking brake actuator and cable assembly. Withdraw from the RH rear wheel arch aperture.
Installation
