ES 330 V6-3.3L (3MZ-FE) (2004)
Parking Brake Cable: Service and Repair
Parking Brake Cable No. 1
REPLACEMENT
1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE FRONT DOOR SCUFF PLATE LH
3. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY UPPER
4. REMOVE INSTRUMENT PANEL INSERT SUB-ASSEMBLY LOWER LH
5. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1
6. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY LOWER
7. REMOVE CONSOLE PANEL UPPER REAR
8. REMOVE CONSOLE BOX CARPET
9. REMOVE RR CONSOLE BOX
10. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
11. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
12. REMOVE AIR DUCT REAR NO. 1
13. REMOVE AIR DUCT REAR NO. 2
14. REMOVE CONSOLE BOX DUCT NO. 1
15. REMOVE YAWRATE SENSOR (W/ VSC)
16. REMOVE PARKING BRAKE CABLE ASSEMBLY NO. 1
a. Loosen the turn buckle, disconnect the parking brake cable assembly No. 1 from the parking brake cable assembly No. 4.
b. Remove the 2 bolts and console box mounting bracket No. 2.
c. Remove the lock nut, adjusting nut and clip, then disconnect the parking brake cable assembly No. 1 from the parking brake control pedal
assembly.
d. Remove the 2 nuts, 2 bolts, clip and parking brake cable assembly No. 1.
17. INSTALL PARKING BRAKE CABLE ASSEMBLY NO. 1