ES 330 V6-3.3L (3MZ-FE) (2004)
(a) Disconnect the starter connector.
(b) Open the terminal cap.
(c) Remove the nut, then disconnect the starter wire.
(d) Remove the 2 bolts, then remove the starter.
9. INSTALL STARTER ASSY
Torque:
37 Nm (380 kgf-cm, 26 ft-lbf) for bolt
9.8 Nm (100 kgf-cm, 7 ft-lbf) for nut
10. INSTALL AIR CLEANER INLET NO.1
Torque: 5.0 Nm (51 kgf-cm, 44 in.-lbf)
11. INSTALL AIR CLEANER BRACKET
(a) Install the air cleaner bracket with the 2 bolts. Using several steps, tighten the bolts uniformly in the sequence shown in the illustration.
Torque: 7.5 Nm (76 kgf-cm, 66 in.-lbf)