ES 330 V6-3.3L (3MZ-FE) (2004)
12. INSTALL AIR CLEANER ASSY
(a) Install the air cleaner case to the air cleaner inlet No.1 as shown in the illustration.
(b) Install the wire harness to the 2 wire harness clamps.
(c) Using several steps, tighten the 3 bolts uniformly in the sequence shown in the illustration.
Torque: 5.0 Nm (51 kgf-cm, 44 in.-lbf)
(d) Connect the vacuum hose.
(e) Connect the VSV connector.
(f) Install the air cleaner filter element.
(g) Install the air cleaner cap, then tighten the air cleaner hose clamp bolt.
(h) Tighten the 2 air cleaner cap bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in.-lbf)
(i) Connect the 4 vacuum hoses.
(1) Connect the mass air flow meter connector.
13. INSTALL BATTERY TRAY
14. INSTALL BATTERY
Torque:
9.0 Nm (92 kgf-cm, 79 in.-lbf) for bolt
3.5 Nm (36 kgf-cm, 31 in.-lbf) for nut
5.4 Nm (55 kgf-cm, 48 in.-lbf) for terminal
15. INSTALL AIR CLEANER INLET ASSY
Torque: 5.0 Nm (55 kgf-cm, 44 in.-lbf)
16. CHECK CONNECTION OF VACUUM HOSE
17. INSTALL RADIATOR SIDE DEFLECTOR RH
18. PERFORM SYSTEM INITIALIZATION