ES 350 V6-3.5L (2GR-FE) (2007)
4. REMOVE REAR DOOR ARMREST COVER
5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY
6. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP
7. REMOVE REAR DOOR SERVICE HOLE COVER
8. REMOVE REAR DOOR TRIM BRACKET
9. REMOVE REAR DOOR GLASS RUN
10. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY
11. REMOVE REAR DOOR QUARTER WINDOW GLASS
12. REMOVE REAR DOOR GLASS SUB-ASSEMBLY
13. REMOVE REAR DOOR LOCK ASSEMBLY
a. Using a "TORX" socket wrench (T30), remove the 3 screws.
b. Move the rear door lock assembly downward and pull the release plate out of the rear door outside handle frame.
c. Remove the door lock wiring harness seal from the rear door lock assembly.
d. Using a screwdriver, disengage the claw.
HINT: Tape the screwdriver tip before use.
e. Remove the rear door inside locking cable assembly.