ES 350 V6-3.5L (2GR-FE) (2007)
3. REMOVE FRONT EXHAUST PIPE NO. 1 SUPPORT BRACKET
(a)
Remove the 2 nuts and front support brackets.
4. REMOVE EXHAUST FRONT PIPE ASSEMBLY
(a)
Disconnect the 2 heated oxygen sensor (bank 1, 2 sensor 2) connectors.
(b) Remove the 2 nuts from the exhaust front pipe (left bank exhaust manifold side).
(c)
Remove the 2 bolts from the exhaust front pipe (right bank exhaust pipe manifold side).
(d) Remove the exhaust front pipe.
(e)
Remove the 2 gaskets from the exhaust front pipe.
5. REMOVE HEATED OXYGEN SENSOR (for Bank 1)
6. REMOVE HEATED OXYGEN SENSOR (for Bank 2)
7. REMOVE REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET
(a)
Remove the 2 bolts and rear support bracket.
INSTALLATION