ES 350 V6-3.5L (2GR-FE) (2007)
1. INSTALL REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET
(a)
Install the rear support bracket with the 2 bolts.
Torque: 33 N*m (337 kgf*cm, 24 ft.*lbf)
NOTICE: Be sure to install the bracket in the correct direction.
2. REMOVE HEATED OXYGEN SENSOR (for Bank 2)
3. INSTALL HEATED OXYGEN SENSOR (for Bank 1)
4. INSTALL EXHAUST FRONT PIPE ASSEMBLY
(a)
Install 2 new gaskets to the exhaust front pipe.
(b) Install the exhaust front pipe to the exhaust manifolds with the 2 nuts and 2 bolts.
Torque: 62 N*m (632 kgf*cm, 46 ft.*lbf)
5. INSTALL FRONT EXHAUST PIPE NO. 1 SUPPORT BRACKET
(a)
Install the front support brackets with the 2 nuts.
Torque: 33 N*m (337 kgf*cm, 24 ft.*lbf)