ES 350 V6-3.5L (2GR-FE) (2007)
9. SEPARATE REAR NO. 1 SUSPENSION ARM
(a)
Remove the bolt and nut, and separate the rear No. 1 suspension arm (rear axle carrier side) from the rear axle carrier sub-assembly.
HINT: When removing the bolt, keep the nut from rotating.
10. REMOVE REAR AXLE CARRIER SUB-ASSEMBLY
(a)
Remove the 2 bolts and 2 nuts, and remove the rear axle carrier sub-assembly from the shock absorber.
INSTALLATION
1. INSTALL REAR AXLE CARRIER SUB-ASSEMBLY
(a)
Install the rear axle carrier sub-assembly to the shock absorber with the 2 bolts and 2 nuts.
Torque: 180 N*m (1,836 kgf*cm, 133 ft.*lbf)
2. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM
(a)
Temporarily tighten the rear No. 1 suspension arm with the bolt and nut.
HINT: Insert the bolt from the rear side of the vehicle and temporarily tighten the bolt.