ES 350 V6-35L (2GR-FE) (2007) Rear Knuckle Service and Repair
3. TEMPORARILY TIGHTEN REAR NO. 2 SUSPENSION ARM
(a)
Temporarily tighten the rear No. 2 suspension arm with the bolt and nut.
HINT: Insert the bolt from the rear side of the vehicle and temporarily tighten the bolt.
4. TEMPORARILY TIGHTEN REAR STRUT ROD
(a)
Temporarily tighten the rear strut rod with the bolt and nut.
HINT: Insert the bolt from the inside of the vehicle and temporarily tighten the bolt.
5. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY
6. INSPECT REAR AXLE HUB BEARING LOOSENESS
7. INSPECT REAR AXLE HUB RUNOUT
8. INSTALL REAR DISC
9. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY
(a)
Install the rear disc brake caliper with the 2 bolts.
Torque: 62 N*m (630 kgf*cm, 46 ft.*lbf)
NOTICE: Do not twist the brake hose when installing the rear disc brake caliper assembly LH.
(b) Install the rear flexible hose with the bolt.
Torque: 19 N*m (192 kgf*cm, 14 ft.*lbf)
10. INSTALL REAR WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
11. STABILIZE SUSPENSION