GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Alarm Module: Service and Repair
Installation
ENGINE IMMOBILIZER: CERTIFICATION ECU: INSTALLATION
INSTALLATION
1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
(a) Engage the clamp.
(b) Install the certification ECU (smart key ECU assembly) with the 2 bolts.
(c) Connect the connectors.
2. INSTALL REAR ACCELERATION SENSOR (w/ AVS) See: Sensors and Switches/Sensors and Switches - Steering and Suspension/Sensors and
Switches - Suspension/Acceleration Sensor/Service and Repair/Rear Acceleration Sensor/Installation
3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service
and Repair/Installation
4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER See: Body and Frame/Doors, Hood and Trunk/Fuel Door/Fuel Door Release
Actuator/Service and Repair/Installation
5. INSTALL ROPE HOOK
6. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Doors, Hood and Trunk/Fuel Door/Fuel Door Release Actuator/Service and
Repair/Installation
7. INSTALL ROPE HOOK ASSEMBLY
8. INSTALL TOOL BOX See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Installation
9. INSTALL TOOL BOX BOARD
10. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Installation
11. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Installation
12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning.
14. INSPECT ADAPTIVE VARIABLE SUSPENSION SYSTEM (w/ AVS)
(a) Inspect the adaptive variable suspension system See: Steering and Suspension/Suspension/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Adaptive Variable Suspension System.
15. REGISTER ECU COMMUNICATION ID
NOTE:
When replacing the certification ECU (smart key ECU assembly), perform initialization See: Accessories and Optional Equipment/Antitheft
and Alarm Systems/Testing and Inspection/Programming and Relearning/Engine Immobilizer System.
16. REGISTER KEY
NOTE:
When replacing the certification ECU (smart key ECU assembly), perform initialization See: Accessories and Optional Equipment/Antitheft
and Alarm Systems/Testing and Inspection/Programming and Relearning/Engine Immobilizer System.