GS 350 RWD V6-3.5L (2GR-FSE) (2007)
a. Apply MP grease to the sliding areas of the lock.
b. Install the hood lock
c. Install the 2 bolts and nut.
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
d. Install a new cap.
e. Connect the hood lock control cable.
4. INSTALL FRONT FENDER PROTECTOR UPPER LH
a. Attach the 3 clips to install the protector.
5. INSTALL HOOD LOCK CONTROL CABLE COVER
a. Attach the claw and install cable cover.
b. Install the 3 screws.
6. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Cruise Control System)
7. INSTALL FRONT BUMPER COVER