GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1816007.png)
8. INSTALL FRONT FENDER LINER RH
9. INSTALL FRONT FENDER LINER LH
10. INSTALL ENGINE UNDER COVER
11. INSTALL COOL AIR INTAKE DUCT SEAL
12. INSTALL ENGINE ROOM SIDE COVER LH
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. PERFORM INITIALIZATION
a. Perform initialization.
NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
15. CHECK SRS WARNING LIGHT
a. Check SRS warning light.
