GS 350 RWD V6-3.5L (2GR-FSE) (2007)
33. REMOVE VISOR BRACKET COVER
a. Using a moulding remover, detach the 4 claws and remove the cover.
34. REMOVE VISOR ASSEMBLY LH
a. Remove the 2 screws and visor.
35. REMOVE VISOR ASSEMBLY RH
a. Remove the 2 screws and visor.
36. REMOVE VISOR HOLDER
a. Remove the visor holder by turning it counterclockwise.
37. REMOVE ROOF HEADLINING ASSEMBLY
a. Disconnect the roof wire and connector from the front pillar.
b. Detach the 4 clips labeled A and 12 clips labeled B.
c. Without sliding roof:
1. Detach the 2 hooks and fastener from the vehicle body side.
d. With sliding roof:
1. Detach the hook and claw from the vehicle body side.
2. Disconnect the connector from the drive gear.
3. Detach the 4 clips labeled A and 12 clips labeled B, and 11 fasteners.