GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1833016.png)
e. Remove the roof headlining from the vehicle through the rear door, as shown in the illustration.
f.
Only when replacing the roof headlining:
1. Remove the 11 fasteners from the roof headlining.
38. REMOVE VANITY LIGHT ASSEMBLY
a. Using a screwdriver, detach the claws.
HINT: Tape the screwdriver tip before use.
b. Spread apart the detached claws and remove the bulb holder from the vanity light.
c. Only when replacing the roof headlining:
1. Detach the claw and remove the vanity light assembly.
