GS 350 RWD V6-3.5L (2GR-FSE) (2007)
22.
Remove the cylinder head cover LH.
A.
Remove the 12 bolts oil seal washer and cylinder head cover.
NOTE
^
Cover the hole around the timing chain with shop rags to prevent foreign material from falling into the engine.
^
The baffle plate is located on the back of the portion shown in the illustration.
^
Do NOT damage the baffle plate when removing the cylinder head cover.
B.
Remove the cylinder head cover gasket from the cylinder head cover.
C.
Remove the 3 gaskets.
23.
Remove the cylinder head cover RH.