GS 350 RWD V6-3.5L (2GR-FSE) (2007)
B.
Clean the camshaft journals and apply engine oil.
C.
Make sure that the valve rocker arms are installed with the lash adjuster and valve stem cap properly as shown in the illustration.
D.
Temporarily put the timing chain to the No. 3 camshaft on the camshaft timing gear assembly and place the No.3 camshaft on the camshaft
housing LH.
NOTE
^
Temporarily put the timing chain on the camshaft timing gear assembly without installing to the sprocket.
^
Place the camshaft as the timing mark faces on the top.
2.
Install the No. 1 camshaft using the same procedure as step 1.
3.
Install the No.4 camshaft.
A.
Clean the camshaft journals and apply engine oil to them.
B.
Hold the No.2 chain and slide the No.4 camshaft in from the front of the vehicle.