GS 350 RWD V6-3.5L (2GR-FSE) (2007)
24.
Remove engine cover No. 1 by removing the 3 clips.
25.
Remove the injector driver by removing the bolt and 2 nuts.
26.
Remove the timing chain cover plate by removing the 4 bolts, timing chain cover plate, and timing chain cover plate gasket.
27.
Set the No. 1 cylinder to TDC/compression.
A.
Set the timing mark to 0° on the timing chain cover by rotating the crankshaft clockwise.
B.
Check that the timing marks of the camshaft timing gear assembly are aligned with the timing marks of the camshaft bearing cap.
HINT:
If the timing marks are NOT aligned, turn the crankshaft one revolution (3600) clockwise and align the timing marks.