GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-508022.png)
(3)
Make sure of the marks and numbers on the camshaft bearing caps and temporarily tighten the 16 bolts.
(4)
Tighten the 9 M6 bolts in the sequence shown in the illustration.
Torque: 10 N*m (102 kgf*cm, 7ft*lbf)
(5)
Tighten the 9 M8 bolts in the sequence shown in the illustration.
Torque: 28 N*m (286 kgf*cm, 21 ft*lbf)
(6)
Tighten the 9 M6 bolts to their final torque value in the sequence shown in Figure 53.
Torque: 16 N*m (163 kgf*cm, 12 ft*lbf)
6.
Install the timing chain.
A.
LH bank:
