GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-508027.png)
^
Remove any oil from the contact surface.
^
Install the head cover within 3 minutes after applying the FIPG sealant.
^
Do NOT start the engine for at LEAST 2 hours after installing.
B.
Install 3 NEW gaskets as shown in the illustration.
C.
Install a NEW gasket to the head cover.
D.
Install the head cover with the 12 bolts.
Torque:
Bolts A:
21 N*m (214 kgf*cm, 15 ft*lbf)
Torque:
Bolts except A:
10 N*m (102 kgf*cm, 7 ft*lbf)
E.
For 4WD:
Install the engine hanger with the 2 bolts.
Torque: 33 N*m (337 kgf*cm, 24 ft*lbf)
