GS 350 RWD V6-3.5L (2GR-FSE) (2007)
(b) Remove the 2 bolts and tire pressure monitor ECU.
4. INSTALL TIRE PRESSURE MONITOR ECU
(a)
Install the tire pressure monitor ECU with the 2 bolts.
Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf)
(b) Connect the connector.
5. INSTALL RADIO RECEIVER ASSEMBLY
HINT:
Refer to the instructions for installation of the radio receiver assembly.
6. CONNECT THE CABLE TO THE NEGATIVE BATTERY TERMINAL
7. REGISTRATION OF TRANSMITTER ID
8. INSPECT TIRE PRESSURE WARNING SYSTEM
SST 09843-18040
9. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal.