GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-77003.png)
e. Enter the given menus: DIAGNOSIS / ENHANCED OBD II / VIN.
3. WRITE VIN
HINT: The flowchart of the VIN writing process is shown. This process allows the VIN to be input into the ECM. If the ECM is changed, or the
VINs do not match, the VIN can be registered, or overwritten in the ECM by following this procedure.
a. Check the vehicle's VIN.
b. Connect the intelligent tester to the DLC2.
c. Turn the engine switch on (IG).
d. Turn the tester ON.
