GS 350 RWD V6-3.5L (2GR-FSE) (2007)
NOTICE:
^
The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape.
^
When installing them, connect the connectors of the same color.
2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY
(a)
Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.
(b) Tighten the 2 tapered-head bolts until the bolt heads break off.
3. INSTALL STEERING COLUMN ASSEMBLY (for 3GR-FSE)
HINT:
Refer to the instructions for Installation of the steering column assembly (3GR-FSE).
4. INSTALL STEERING COLUMN ASSEMBLY (for 3UZ-FE)
HINT:
Refer to the instructions for Installation of the steering column assembly (3UZ-FE).