lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Absorber Control Actuator (For Front Side)|Page 8960 > < Absorber Control Actuator (For Front Side)|Page 8958
Page 1
background image

Damping Control Actuator: Service and Repair
Absorber Control Actuator (For Rear Side)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:  Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.

2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
3. REMOVE LUGGAGE COMPARTMENT TRIM COVER SIDE LH
4. REMOVE LUGGAGE COMPARTMENT TRIM COVER SIDE RH
5. REMOVE TOOL BOX
6. REMOVE REAR FLOOR FINISH PLATE
7. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT
8. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LH
9. REMOVE REAR SHOCK ABSORBER CAP

a. Remove rear shock absorber cap and disconnect the connector.

10. REMOVE ABSORBER CONTROL ACTUATOR

a. Turn the absorber control actuator counterclockwise approximately 40° to remove it.

INSTALLATION

1. INSTALL ABSORBER CONTROL ACTUATOR

Absorber Control Actuator (For Front Side)|Page 8960 > < Absorber Control Actuator (For Front Side)|Page 8958